|
|
|
--
MicroCode Studio Plus --
|
|
Tired
of guessing..? The new MicroCode Studio ICD enables you to execute your PICBasic Pro program on a host PIC microcontroller while viewing internal variables, Special Function Registers, memory and EEPROM contents as your program executes. Toggle single or multiple breakpoints, run full program code animations, or single-step through your PICBasic Pro program code line by line.
|
|
The ICD Code Window The ICD Code Window shows the line of code currently being executed. Watch line by line as internal calculations & logical operations are carried out, and view the results of each operation in real-time in the ICD Explorer Window.
Insert single or multiple breakpoints to
halt program execution at strategic points within your program. The
RED bar [shown above] shows a set
breakpoint. The BLUE bar [shown above]
indicates the line of code currently being executed. |
|
The ICD Explorer Window
The ICD Explorer window is automatically opened by MicroCode Studio when the ICD is started. Tabs at the top of the Explorer enable you to select which values are displayed. Data is displayed in decimal, hexadecimal and binary formats. As your program executes the results of calculations & logical operations on internal registers & variables will update on-screen eliminating the guess-work normally associated with embedded programming. Similar to Microchips MPLAB™, but specifically designed for use with the PICBasic Pro Compiler, and much easier to learn. Watch on-screen as each line of code executes directly in the target PICMicro with MicroCode Studio. Debugging your applications has never been easier.
|
|
System Requirements In order to run the ICD, you'll need a copy of either MicroCode Studio or MicroCode Studio Plus. In addition, you will also need the microEngineering Labs PICBasic PRO compiler, version 2.20 or higher. The MicroCode Studio ICD will not work with the PICBasic standard compiler. Free Test Drive Take MicroCode Studio for a test-drive absolutely FREE. Just download MicroCode Studio software below, and see what you've been missing. When you're ready for maximum flexibility, and extended device support, purchase MicroCode Studio Plus on CD-ROM HERE. Visit Our MicroCode Studio ICD Project Page We've put together a simple project showing how to use the free version MicroCode Studio in-circuit debugger with the LAB-X3 PIC development board, and a sample schematic to build your own ICD interface circuit with the PIC16F628 microcontroller HERE.
|
| MicroCode
Studio The ICD for MicroCode Studio supports the following PIC microcontroller devices, and can be downloaded HERE An excellent & FREE way to see MicroCode Studio in action before purchasing MicroCode Studio Plus on CD-ROM. Visit our new ICD project page HERE to learn how to get your first project up & going with the FREE version. 16F628 MicroCode Studio Plus The ICD for MicroCode Studio Plus supports the following PIC microcontroller devices, and can be purchased HERE 16F627, 16F628, 16F73, 16F74, 16F76, 16F77, 16F870, 16F871, 16F873, 16F874, 16F876, 16F877 |
|
Contact information: | How to order | Shipping Options | Copyright
© 1999-2001 Reynolds Electronics
|
