PicBasic Pro, PicBasic, BASIC Stamp, Microchip PIC, 8051, and Remote Control Projects


Back to the Remote Control Store

Note: We have minimum order requirements of $10.00 for all online credit card orders.
 

DS1620 SOIC Surface Mount Temperature Sensor Price $3.50 ea
Quantity:

These normally cost $6.97 each. We have a partial spool left over from a previous job, so we're offering these at a big discount. The DS1620 is a digital I/O thermometer/thermostat featuring ±0.5°C accuracy. Measures temperatures from -55°C to +125°C in 0.5°C increments; Fahrenheit equivalent is -67°F to +257°F in 0.9°F increments. Click HERE for the DS1620 datasheet.

DS18B20 1-Wire Temperature Sensor Price $7.00 ea
Quantity:

The DS18B20 is a digital I/O thermometer featuring a ±0.5°C accuracy. Data is read out over a 1-Wire serial bus in 2's complement format with 9 to 12 bits (user programmable) of resolution, equivalent to a 0.5°C to 0.0625°C LSB weight. Click HERE for a project showing how to use this sensor with PicBasic Pro.

OED-EL-8L High-Power 180mW Infrared LED (40 Deg Beam) Price $0.55 ea
Quantity:
The OED-EL-8L infrared LED is used in many of our infrared projects here. These are T-3mm size, have a 44 degree beam angle for wide coverage, and matched for the Panasonic PNA4602M detector modules below. Visit the Lumex web site HERE for data sheets

OED-EL-1L2 High-Power 200mW Infrared LED (60 Deg Beam) Price $0.60 ea
Quantity:
The OED-EL-1L2 infrared LED is used in many of our infrared projects here. These are T-5mm size, have a whopping 60 degree beam angle for wide coverage, and matched for the Panasonic PNA4602M detector modules below. Visit the Lumex web site HERE for data sheets.

LP2950 Micro-Power (100mA) Low Dropout Regulator Price $2.50 ea
Quantity:
The LP2950 is an excellent +5 volt regulator for battery powered applications, has a very low drop-out voltage. Click HERE for the data sheet.

LM2940 +5V (1.0 AMP) Regulator TO-220 Package Price $2.00 ea
Quantity:
One of the most common +5 volt regulators being used today. The LM2940 is a +5 volt regulator. It can deliver up to 1A current, and is simple to use. Click HERE for the data sheet.

4MHz Ceramic Resonator With Internal Capacitors Price $1.50 ea

Quantity:
These ZIT series ceramic resonators have internal capacitors, and will replace crystals in most microcontroller applications. The internal capacitors reduce the parts count normally required with standard crystals. We use these ceramic resonators in 99.9% of our PIC applications found here on the web site. Click HERE for the data sheet.

20MHz Ceramic Resonator With Internal Capacitors Price $1.60 ea
Quantity:
This is the 20MHz version ceramic resonator shown above. Click HERE for the data sheet.

2N3904 NPN General Purpose Transistor Price $0.50 ea
Quantity:
This NPN transistor is designed as a general purpose amplifier and switch. The useful dynamic range extends to 100 mA as a switch and to 100 MHz as an amplifier. Click HERE for the data sheet.

2N3906 PNP General Purpose Transistor Price $0.50 ea
Quantity:
This PNP transistor is designed for general purpose amplifier and switching applications at collector currents of 10 µA to 100 mA. Click HERE for the data sheet.

ZTX600 High-Performance Darlington NPN Transistor Price $1.50 ea
Quantity:
The ZTX600 is a high-performance Super E-Line series darlington transistor that can handle a continuous collector current of 1A, and a peak pulsed current of 4A (yes that's 4 amps). It comes in a tiny modified TO92 style package, and is an excellent choice for pulse-driving infrared LED's. We use them in all the Fire-Stick designs. Click HERE for the data sheet.

ULN2803A High-Current Darlington Transistor Array Price $1.40 ea
Quantity:
The ULN2803A is a high-current, high-voltage, darlington transistor array used for driving relays, and displays. It contains internal protection diodes to help prevent fly-back damage when a relay coil is de-energized. Click HERE for the data sheet.

CD74HCT132E Quad 2-Input NAND Schmitt Trigger Price $1.50
Quantity:
The CD74HCT132 NAND schmitt trigger is used in our infrared communications KIT to mix the 38KHz carrier & data signals together. This IC is useful for many various applications. Click HERE for the data sheet.

Infrared & RF Remote Control Components
In Stock At
Remote Control Store
Add Remote Control to your next project

Visit Our New Site Index
HERE
 for a comprehensive list of all
products & projects available from
Reynolds Electronics.


Copyright © 1999-2007 Reynolds Electronics

| Contact Information |