LAB-X3 PIC Development Board

BASIC Stamp, Microchip PIC, 8051, and Remote Control Projects

--- LAB-X3 PIC Development Board ---

Quantity:

Item: LAB-X3 PIC Development Board
Price: $119.95
Part Number: LAB-X3

The new LAB-X3 provides a full complement of hardware peripherals for an 18-pin microcontroller such as the PIC16F84 or PIC16F62x series [not included].

The LAB-X3 contains the circuitry required by the PICmicro MCU to operate: 5-volt power supply, oscillator, reset circuit, as well as an RS-232 serial port, 2-line x 20-character LCD module, and basic analog and digital I/O. The board is designed to accommodate 18-pin MCUs, including the popular PIC16F84A and the new PIC16F62x.

Many different projects may be created using the LAB-X3. Some examples include LCD clock, servo controller, LCD backpack, and many more. The LAB-X3 can run programs written in assembler, C and PicBasic or PicBasic Pro. Sample programs are included.

The in-circuit programming connector allows the resident PICmicro MCU to be reprogrammed on the fly (requires flash device) using programmers that support this feature like the U2 USB HERE. It is recommended the LAB-X3 be used with the 18-pin PIC16F628 or PIC16F84A. These flash devices may be reprogrammed again and again. The LAB-X3 comes complete with a parts list and schematic.

Sample PicBasic Pro programs included with the LAB-X3 (Courtesy of MicroEngineering Labs).

blinkx3.bas blinkx3.hex	PicBasic Pro program to blink an LED connected to PORTB.4 about once a second
bpx3.bas bpx3.hex	PicBasic Pro program to simulate an LCD Backpack
butx3.bas butx3.hex	PicBasic Pro program to show button press on LED
clockx3.bas clockx3.hex	LCD clock program using On Interrupt
countx3.bas countx3.hex	PicBasic Pro program to show binary count on 2 LEDS
hellox3.bas hellox3.hex	PicBasic Pro program to send "Hello World" on serial port
hserx3.bas hserx3.hex	PicBasic Pro program to send and receive from the hardware serial port - LEDs count characters and flash error if none received for 10 seconds
lcdx3.bas lcdx3.hex	PicBasic Pro program to display "Hello World" on LCD
potx3.bas potx3.hex	PicBasic Pro program to read pot and display on LCD
servox3.bas servox3.hex	PicBasic Pro program to move RC servo using buttons
testx3.bas testx3.hex	PicBasic Pro test program for PIC-X3 (16F628)
upperx3.bas upperx3.hex	PicBasic Pro upper case serial filter
vux3.bas vux3.hex	PicBasic Pro program to display pot on 2 segment bargraph

Sample PicBasic programs included with the LAB-X3 (Courtesy of MicroEngineering Labs).

blinkx3.bas blinkx3.hex	PicBasic program to blink an LED connected to PORTB.4 about once a second
butx3.bas butx3.hex	PicBasic program to show button press on LED
hellox3.bas hellox3.hex	PicBasic program to send "Hello World" on serial port
hserx3.bas hserx3.hex	PicBasic program to send and receive from the hardware serial port LEDs count characters and flash error if none received for 10 seconds
lcdx3.bas lcdx3.hex	Demonstrate operation of an LCD in 4-bit mode
potx3.bas potx3.hex	PicBasic program to send pot value to serial port
servox3.bas servox3.hex	PicBasic program to move RC servo using potentiometer
upperx3.bas upperx3.hex	PicBasic upper case serial filter

Return to

PicBasic Product Page

| Contact Information |

International Customers Please read
| How to order | Shipping Options |