LAB-X1 PIC16F877 PIC Development Board

BASIC Stamp, Microchip PIC, 8051, and Remote Control Projects

--- LAB-X1A PIC Development Board ---

Quantity:

Item: LAB-X1A PIC Development Board
Price: $199.95
Part Number: LAB-X1A

The Lab-X1A includes in-circuit programming connectors so the resident PICmicro may be reprogrammed on the fly (requires flash PIC) using programmers that support this feature. Because the Lab-X1 itself is not a programmer, a separate PICmicro microcontroller programmer, such as the EPIC Programmer is required to program the PICmicro in the 40-pin zif socket.

All of the PIC I/O pins are brought out to headers next to a 40-pin ZIF socket. This allows connection to off-board circuits as well as allowing on-board circuits to be connected to other pins, if desired. The PIC-X1 is designed to work with 40-pin PICmicro, but can be jumpered to work with smaller PICmicro, but It's recommended that the Lab-X1A be used primarily with the 40-pin PIC16F877 (available separately). This flash device has 8K of code space, 33 I/O pins, 8 ADC channels and may be reprogrammed again and again.

Features:

	Inputs: 16 switch keypad, 3 potentiometers, IR, temperature, real time clock
	Outputs: LED bar graph, 2x20 LCD module, speaker, DTMF, PWM, IR, 2 RC servo connectors
	I/O: RS232 interface, RS485 interface
	Serial EEPROM: I2C, SPI, Microwire
	Misc: Reset button, 5-volt regulator, 40-pin ZIF socket for PICmicro (device optional)
	Jumper selectable oscillator from 4MHz to 20MHz
	In-circuit programming/debug connectors
	Prototyping area for additional circuits
	Available assembled, as a kit or as a bare PCB
	Size is 5.5" x 5.6"

The Lab-X1A board includes:

	40-pin ZIF socket for PICmicro MCU (device optional)
	5-volt regulator
	Jumper selectable oscillator from 4MHz to 20MHz
	Reset button
	16 switch keypad
	3 potentiometers
	LED bar graph
	2 line by 20 character LCD module
	Speaker
	2 RC servo connectors
	RS232 interface
	Socket for RS485 interface (device not included)
	Socket for I2C serial EEPROM (device not included)
	Socket for SPI serial EEPROM (device not included)
	Socket for Microwire serial EEPROM (device not included)
	Socket for real time clock/serial analog to digital converter (devices not included)
	Socket for Dallas 1620/1820 temperature ICs (devices not included)
	EPIC in-circuit programming connector
	Wiring for Microchip in-circuit debug connector
	Prototyping area for additional circuits

Click HERE for the Lab-X1A schematics in Adobe .PDF format.
Click HERE for sample code for use with the Lab-X1A

Return to

PicBasic Product Page

| Contact Information |

International Customers Please read
| How to order | Shipping Options |