Add a 4-digit "SERIAL" seven-segment LED
display to your next BASIC Stamp project : This project shows how to use
the new SLED4C serial seven-segment LED display with the BASIC Stamp.
Convert your IR transmitter to RF: This project shows how to build an
infrared to RF, RF to infrared transmitter extender. Use your existing IR
transmitter from anywhere in your house to control your TV, stereo, CD
player, BASIC Stamp projects, BOE robots and more.
data communications. This project shows how to build an infrared data
communications system that lets your BASIC Stamps talk to each other over
infrared light at up to 2400 baud. It's simple, it's excellent, and it's
more fun than a barrel of Stamps...
a simple, inexpensive, RF wireless communications system for the BASIC
Stamp. This article shows how to use the TWS-434 and RWS-434 RF
modules with the BASIC Stamp for wireless communications links.
to use the BASIC Stamp to help troubleshoot your PC.
This project decodes the port 80 diagnostic port common to nearly all PCs and displays the last component tested, in
English, should the computer hang on power up self test (POST).
The Basic Stamp
I Rev D with the
Velleman K2645 Geiger/Muller counter kit and a Hitachi compatible one-line LCD panel
Data Terminal/Logging Software
and log all
incoming serial data from your PC serial port with our custom serial
a custom RS-232 Analog Voltage Meter
With your PC
& the BASIC Stamp. This project uses the BASIC Stamp and an ADC0831,
8-Bit AD integrated circuit for an RS-232 Data Logging analog voltage
meter. Measure, log, and view 0-5 volts using your
PC with our custom [single-channel, 8-bit] voltmeter software.
a "10-Key Serial keypad"
Use a single I/O-pin on your BASIC Stamp to accept keypad
entry. Ser-Key lets you build 10-key "serial" keypads using
simple push-button switches.
Learn to control relays with your PC & the
Basic Stamp. Including the ability to
pre-program relay ON/OFF times for "Unattended Relay Operation" It's
automatic, it's 3--D and it's Awesome.
Mini SSC II Serial Servo Controller.
"NEW" Animatronics Special.
Here is the Complete Software & a Tutorial showing you how to build your own software
interface to take full control of the Mini SSC II Serial Servo Controllers from Scott
Edwards Electronics. Complete installation & setup program included along with all of
the Visual Basic files to roll-your-own.
NEW PROJECT.... How to build a relay controller using the Basic Stamp I and your PC. This project
comes complete with Visual Basic control software for interfacing the Basic Stamp to your